Product introduction:

This product is used in combination with the grounding machine and polishing pad to repair the slight damage of the marble and enhance the brightness and hardness of the marble surface. Suitable for daily maintenance of marble.

Use instructions:

1.Surface must be clean and dry. On floor surfaces, make sure all waxes, floor finish or other coatings are removed.

2.Put the product into a spray bottle. Spray the product (without dilution) over about 2m² until fairly wet (spray about 12 times).

3.Immediately use a low-speed wiper with a steel wool polishing pad or a brown polishing pad to dry to the light.

4.If necessary, repeat above procedures.

5.Coverage: 500-1500m²/5L.

Note: Shake well before use.